|
GT-Jr Price list - 1/23/01 |
|
|
OmniTurn GT-Jr. including: 5 hp spindle drive, flood
coolant, lever collet closer, 10 MB hard drive, 220V 1 or 3 phase, Extended X
axis travel 12" |
$26,795 |
|
4 degree spindle nose |
$495 |
|
|
|
|
½" center height |
$85 |
|
3/8" center height |
$0 |
|
2" center height - |
$715 |
|
C axis spindle drive |
$5,500 |
|
Short cycle option for C axis spindle drive - New 1/01 |
$300 |
|
Pneumatic collet closer |
$2,065 |
|
Halogen work lamp - New 12/00 |
$275 |
|
Foredom live tool including: 220V single phase 1/4hp motor
- 20,000 rpm max, spindle, drive shaft, speed controller, 1/8""
& 1/4"" collet, lubricant for spindle bearings. |
$550 |
|
Suhner live tool - light duty- Includes Minifix drive, NA7
cable, BEWI-4 spindle |
$1,350 |
|
Suhner live tool Medium duty - includes motor - 1,020 to
14,400 rpm in 7 steps via gear box., spindle - uses ER16 collets - 10mm max,
drive shaft. 1.36hp, 220V 3 phase. |
$2,575 |
|
|
|
|
M function controlled outlet: 220V three phase |
$395 |
|
M function controlled outlet: Pneumatic with FRL |
$395 |
|
M function controlled outlet for NSK Astro-E |
$295 |
|
Lag bolt kit for OmniTurn GT-75 and GT-Jr |
$95 |
|
TripleAir pneumatic bar feed 12' x 1-1/16" |
$2,250 |
|
OmniTurn 3" - 2 jaw chuck, .25"" diameter
stroke, blind, max 5000 rpm. Requires the
pneumatic collet closer option |
$2,295 |
|
OmniTurn 4" - 3 jaw chuck, .25" dia. stroke,
blind, 5,000# holding force. Requires the
pneumatic collet closer option |
$2,495 |
|
OmniTurn 4.5" - 3 jaw chuck, .17"" dia.
stroke, 1" through hole, 4000# holding force. Requires the pneumatic collet closer option |
$2,995 |
|
Part Conveyor - installed at factory. |
$1,750 |
|
Additional I/O package, 8 in/6 out, programmable from
Control |
$795 |
|
Transformer for control - 220V to 115V - 750 KVA |
$350 |
|
* Startup by OmniTurn Tech. - Travel and expenses billed
at cost |
$650 |